Program
4th World Congress on Mechanical, Chemical,
and Material Engineering (MCM'18)
Madrid, Spain, August 16 - 18, 2018
The MCM'18 Congress is composed of 5 conferences
| 3:00 PM - 5:00 PM | Registrations |
||
Registrants from the four conferences are permitted, and even encouraged, to attend sessions from any of the four conferences.
The Congress will be held at the Novotel Madrid Center. For more information about the venue, please visit: Congress Venue
| 8:00 - 9:00 |
Registrations |
||||
| 9:00 - 9:15 |
Official Opening
|
||||
|
Parallel Sessions |
|||||
|
Room 1 |
Room 2 |
Room 3 |
|||
| 9:15 - 10:00 |
Keynote Lecture
Active Control of Viscous Fingering Instabilities in Porous Media Flows
|
9:15 - 10:00 |
Keynote Lecture
Natural Material Short Fibre Composites via Additive Manufacturing
|
||
| 10:00 - 10:45 |
Keynote Lecture
Modified Biomass for Pollution Cleaning under the Frames of Biorefinery and Sustainable Circular Bioeconomy
|
10:00 - 10:45 |
Keynote Lecture
Tempering Response of Martensitic and Bainitic Microstructures
|
||
| 10:45 - 11:25 | Coffee Break |
||||
| 10:45 - 11:25 |
Session
Poster Session I |
||||
| 11:25 - 12:25 |
Session
Numerical Fluid Flow and Heat Transfer I |
11:25 - 12:25 |
Session
Industrial Engineering I |
11:25 - 12:25 |
Session
Separation Processes |
| 12:25 - 12:30 | Group Photo |
||||
| 12:30 - 1:30 | Lunch |
||||
| 1:30 - 2:50 |
Session
Micro and Nano Fluids |
1:30 - 2:50 |
Session
Solid Mechanics |
1:30 - 2:15 |
Keynote Lecture
Design of Composites, Catalysts, and Building Materials Using Insights from Simulation and Experiment
|
| 2:15 - 3:25 |
Session
Polymer Science and Engineering |
||||
| 2:50 - 3:30 | Coffee Break |
||||
| 2:50 - 3:30 |
Session
Poster Session II |
||||
| 3:30 - 5:00 |
Session
Heat Transfer Enhancement |
3:30 - 4:00 |
Session
New Materials and Performances |
3:30 - 4:00 |
Session
Biomechanics |
| 5:00 - 6:10 |
Session
Numerical Fluid Flow, Heat and Mass Transfer II |
4:00 - 5:40 |
Session
Mining Fundamentals and Techniques |
4:00 - 5:50 |
Session
Fluid Dynamics, Heat Transfer, and Mass Transfer |
Keynote Lecture
August 17 | 9:15 - 10:00 | Room 1 | Session Chair: Dr. Hani Mitri, McGill University, Canada
Active Control of Viscous Fingering Instabilities in Porous Media Flows
Dr. Jalel Azaiez, The University of Calgary, Canada
Jalel Azaiez is currently a Professor at the Department of Chemical and Petroleum Engineering in the University of Calgary (Canada). He is also Associate Dean in the Faculty of Graduate Studies. He holds a Dilôme d’Ingénieur from the Ecole Centrale de Paris (France) and a M.Sc. and Ph.D. from Stanford University (U.S.A.) both in Chemical Engineering. His recent research focuses on modelling fluid flow instabilities and in particular those involving complex flows in porous media. These include non-isothermal flows with or without chemical reactions, involving Newtonian and non-Newtonian fluids with a particular focus on nanofluids in micro-geometries. His research team has developed a number of software and mathematical algorithms to analyze flow instabilities under a wide variety of conditions that have applications in the fields of oil recovery, soil remediation and materials processing. He holds a number of awards on his research and teaching accomplishments. He serves on the editorial board of three Journals and has presented invited talks and seminars in numerous worldwide forums (Belgium, France, Japan, USA, etc.).
View Abstract Return to Top ⇑
Keynote Lecture
August 17 | 9:15 - 10:00 | Room 2 | Session Chair: Dr. Mohamed Hamed, McMaster University, Canada
Natural Material Short Fibre Composites via Additive Manufacturing
Dr. Patrick Fairclough, The University of Sheffield, UK
Professor Patrick Fairclough completed his undergraduate and postgraduate studies at the University of Birmingham, graduating with a PhD in Neutron Scattering in 1995. He spent a short period in industry developing bespoke scientific equipment before returning to academia, focusing on scattering techniques applied to Polymers and Soft Condensed Matter. He took an academic position, in Chemistry, at the University of Sheffield in 1997, and moved to a chair in manufacturing within Mechanical Engineering in 2013.
Prof. Fairclough research covers a range of polymers, common in the coatings and composites industries. His team has interests in the manufacturing of coatings and composites ranging from synthetic polymer chemistry, phase separation, networks and diffusion, to novel manufacturing technologies. He works with a wide variety of scientist and engineers from academic, industry and health care.
View Abstract Return to Top ⇑
Keynote Lecture
August 17 | 10:00 - 10:45 | Room 1 | Session Chair: Dr. Hani Mitri, McGill University, Canada
Modified Biomass for Pollution Cleaning under the Frames of Biorefinery and Sustainable Circular Bioeconomy
Dr. Dimitrios Sidiras, University of Piraeus, Greece
Academic Position: Professor, Department of Industrial Management and Technology, School of Maritime and Industrial Studies, University of Piraeus, Piraeus, Greece
Scientific Activities: Research interests include experimental and computational simulation of industrial/chemical processes; economo-technical analysis of industrial branches/organic chemical industry; renewable energy sources; biomass; natural resources management; GIS based management; environmental management; manufacturing of agricultural product/byproducts; teaching methodology; distance learning. Scopus: Documents: 48. Citations: 766 total citations by 650 documents. h Index: 12. Google scholar: Documents: 98. Citations: 1249. h-index: 14.
View Abstract Return to Top ⇑
Keynote Lecture
August 17 | 10:00 - 10:45 | Room 2 | Session Chair: Dr. Mohamed Hamed, McMaster University, Canada
Tempering Response of Martensitic and Bainitic Microstructures
Dr. Emmanuel De Moor, Colorado School of Mines, USA
Emmanuel De Moor is Assistant Professor with the George S. Ansell Department of Metallurgical and Materials Engineering at the Colorado School of Mines. He received his MS and PhD degrees in Materials Engineering from the University of Ghent, Belgium. His research interests pertain to physical metallurgy of ferrous alloys and understanding interrelationships between properties, microstructure, alloying and processing history. He is involved in advanced high strength sheet, plate, wire, rail and forging steel research at the advanced steel processing and products research center, an industry-university cooperative research center at Colorado School of Mines. He currently teaches metallurgical and materials thermodynamics and iron and steelmaking. He is a recipient of the AIST Kent D. Peaslee junior faculty award, the SAE/AISI Sydney H. Melbourne Award for Excellence in the Advancement of Automotive Sheet Steel and the 2016 Outstanding Young Manufacturing Engineer Award.
View Abstract Return to Top ⇑
Session
August 17 | 10:45 - 11:25 | LOBBY | Session Chairs: Dr. Zhaomiao Liu, Dr. Yan Pang & Dr. Sandip Kumar Saha
Poster Session I
HTFF 117
Authors: Tetsuhiro Tsukiji, Taisei Tajima, Rei Suzuki
HTFF 153
Authors: Chanhee Moon, Hyunduk Seo, Sang Youl Yoon, Kyung Chun Kim
HTFF 109
Authors: Hyo Chang Cho, Bo Wang, Sung Hoon Kim, Jeung Sang Go
HTFF 136
Authors: Artur Miros
HTFF 151
Authors: Jun Seok Lee, June Kee Min
HTFF 110
Authors: Jung-Yup Kim, Su-Gak Lee
HTFF 113
Authors: Su-Gak Lee, Jung-Yup Kim
HTFF 132
Authors: Jifen Wang, Huaqing Xie, Zhixiong Guo
HTFF 133
Authors: Lifei Chen, Lei An, Wei Yu, Huaqing Xie
HTFF 150
Authors: Seong Pil Son, Sung Joo Hong, Syed Muhammad Ammar, Min Soo Kim, Chan Woo Park
ICCPE 126
Authors: Emilio Meaurio, Eva Sanchez-Rexach, Jone Muñoz, Jose-Ramon Sarasua
ICCPE 127
Authors: Jone Muñoz, Eider Aldalur, Eva Sanchez-Rexach, Iñigo Revilla, Aitor Larrañaga, Jose-Ramon Sarasua
Return to Top ⇑
Session
August 17 | 11:25 - 12:25 | Room 1 | Session Chair: Dr. Thomas Adams
Numerical Fluid Flow and Heat Transfer I
HTFF 122
Time: 11:25 - 11:45
Presenter: Laura Carolina Lara-Guzmán, National Autonomous University of Mexico, Mexico
Authors: L.C. Lara-Guzmán, E. Martínez-Espinosa, M. Salinas-Vázquez, W. Vicente
HTFF 115
Time: 11:45 - 11:55
Presenter: ByeongSu Kim, Korea University, Korea
Authors: ByeongSu Kim, Yongchan Kim
HTFF 128
Time: 11:55 - 12:05
Presenter: Jonghyo Lee, University of Hanyang, Korea
Authors: Jonghyo Lee, Namkwon Lee, Sukkee Um
ICCPE 124
Time: 12:05 - 12:25
Presenter: Chandra Mouli Madhuranthakam, Abu Dhabi University, UAE
Authors: Chandra Mouli R. Madhuranthakam, Sudhanshu S. Soman
Return to Top ⇑
Session
August 17 | 11:25 - 12:25 | Room 2 | Session Chair: Dr. Istvan Gabor Gyurika
Industrial Engineering I
ICMIE 112
Time: 11:25 - 11:45
Presenter: Mustafa Ahmet Beyazıt Ocaktan, Balikesir University, Turkey
Authors: A. Deniz Karaoglan, M. A. Beyazit Ocaktan, Demet Gonen, Ali Oral, S. Selin Kundakci, Can Tuncer
ICMIE 102
Time: 11:45 - 12:05
Presenter: Felix Chan, The Hong Kong Polytechnic University, Hong Kong
Authors: Jiage Huo, Felix T.S. Chan, Carman K. M. Lee, Jan Ola Strandhagen, Ben Niu
ICMIE 128
Time: 12:05 - 12:15
Presenter: Young Seok Ock, Pukyong National University, Korea
Authors: Jong-Rae Cho, So-Yeon Ock, Youg-Seok Ock
ICMIE 101
Time: 12:15 - 12:25
Presenter: Felix Chan, The Hong Kong Polytechnic University, Hong Kong
Authors: I. A. Shaban, F. T. S. Chan, S. H. Chung, T. Qu, B. Niu
Return to Top ⇑
Session
August 17 | 11:25 - 12:25 | Room 3 | Session Chair: Dr. Hamed Ahari
Separation Processes
ICCPE 106
Time: 11:25 - 11:35
Presenter: Manop Charoenchaitrakool, Kasetsart University, Thailand
Authors: Manop Charoenchaitrakool, Ornkanit Chantes
ICCPE 107
Time: 11:35 - 11:55
Author: Dimitrios Sidiras, University of Piraeus, Greece
ICCPE 108
Time: 11:55 - 12:15
Presenter: Dimitrios Sidiras, University of Piraeus, Greece
Authors: Ioanna Salapa, Panagiotis Haralampous, Georgios Giakoumakis, Antonios Nazos, Dimitrios Sidiras
ICCPE 120
Time: 12:15 - 12:25
Presenter: Nenad Kuzmanić, University of Split, Croatia
Authors: Antonija Čelan, Marija Ćosić, Igor Pehnec, Nenad Kuzmanić
Return to Top ⇑
Session
August 17 | 1:30 - 2:50 | Room 1 | Session Chairs: Dr. Juan P. Solano & Chi Zhang
Micro and Nano Fluids
HTFF 107
Time: 1:30 - 1:40
Presenter: Xiang Wang, Beijing University of Technology, China
Authors: Xiang Wang, Yan Pang, Zhaomiao Liu
HTFF 108
Time: 1:40 - 1:50
Presenter: Jose Carlos Arcos, Instituto Politecnico Nacional, Mexico
Authors: J. E. Muñoz, J. C. Arcos1, O. E. Bautista, E. G. Bautista, F. Méndez
HTFF 141
Time: 1:50 - 2:10
Presenter: Sandip Kumar Saha, Indian Institute of Technology Bombay, India
Authors: D. Behera, D. Mohanty, D. P. Ghosh, S. K. Saha, R. Raj
HTFF 148
Time: 2:10 - 2:30
Presenter: Thomas Adams, Rose-Hulman Institute of Technology, United States
Authors: Thomas M. Adams, Jason T. Collins, Johann Fernando, Sarah M. Griffin, Robert L. Kreft, Helio Kuok, Alexander E. McFarland, Ethan J. Wasylewski
HTFF 149
Time: 2:30 - 2:40
Presenter: Zhaomiao Liu, Beijing University of Technology, China
Authors: Yan Pang, Xiang Wang, Zhaomiao Liu
HTFF 157
Time: 2:40 - 2:50
Presenter: Carlos Vargas, Instituto Politecnico Nacional, Mexico
Authors: Carlos Vargas, Carlos Escobedo, Aristides Docoslis, Oscar Bautista
Return to Top ⇑
Session
August 17 | 1:30 - 2:50 | Room 2 | Session Chair: Dr. Patrick Fairclough, The University of Sheffield, UK
Solid Mechanics
ICMIE 124
Time: 1:30 - 1:50
Presenter: Tufan Gürkan Yılmaz, Uludag University, Turkey
Authors: Tufan Gürkan Yılmaz, Fatih Karpat
ICMIE 125
Time: 1:50 - 2:10
Presenter: Celalettin Yuce, Uludag University, Turkey
Authors: Celalettin Yuce, Fatih Karpat, Nurettin Yavuz
ICMIE 111
Time: 2:10 - 2:20
Presenter: Jeong-Mo Ku, Pusan National University, Korea
Authors: Jeong-Mo Ku, Min-Jung Sim, Weui-Bong Jeong, Chinsuk Hong
ICMIE 109
Time: 2:20 - 2:40
Author: Gyurika István Gábor, University of Pannonia, Hungary
ICMIE 117
Time: 2:40 - 2:50
Presenter: Haedo Jeong, Pusan National University, Korea
Authors: Haedo Jeong, Dasol Lee, Hyunseop Lee
Return to Top ⇑
Keynote Lecture
August 17 | 1:30 - 2:15 | Room 3 | Session Chair: Dr. Dimitrios Sidiras, University of Piraeus, Greece
Design of Composites, Catalysts, and Building Materials Using Insights from Simulation and Experiment
Dr. Hendrik Heinz, University of Colorado-Boulder, USA
Hendrik Heinz is an Associate Professor of Chemical and Biological Engineering at University of Colorado at Boulder. His research focuses on the simulation of biomaterials and nanomaterials at the nanometer scale. He develops the Interface force field for the simulation of all compounds across the periodic table in a uniform platform in high precision, with applications to alloys, biomaterials, catalysis, aqueous corrosion, mineralization, hydrogels, and polymer materials. He holds a Ph.D. degree in Material Science and Engineering as well as a M.S. degree in chemistry from ETH Zurich, Switzerland and completed postdoctoral work at the Air Force Research Laboratory, Ohio. He is an Associate Editor for the CNRS-owned New Journal of Chemistry, and earlier served on the faculty of the University of Akron, Ohio, from 2006 to 2015 and as an Associate Editor of RSC Advances. He is a Fellow of the Royal Society of Chemistry (UK) and held several guest professorships. He won the Special Creativity and Career Awards from the U. S. National Science Foundation, the Sandmeyer Award from the Swiss Chemical Society, the Max Hey Medal from the Mineralogical Society, the Giovanni Novelli Prize from the Italian Clay Minerals Society, as well as a Hewlett-Packard Outstanding Junior Faculty Award from the American Chemical Society.
View Abstract Return to Top ⇑
Session
August 17 | 2:15 - 3:25 | Room 3 | Session Chair: Dr. Dimitrios Sidiras, University of Piraeus, Greece
Polymer Science and Engineering
ICCPE 119
Time: 2:15 - 2:35
Authors: Manuel Laspalas, Miguel-Ángel Jiménez-Caballero, José-Luis Pelegay, José-Luis Núñez, Ismael Viejo
ICCPE 128
Time: 2:35 - 2:55
Presenter: Eva Sanchez, University of the Basque Country, Spain
Authors: Eva Sanchez-Rexach, Sivan Nir, Meital Reches, Jose-Ramon Sarasua
ICCPE 102
Time: 2:55 - 3:05
Presenter: Nanthiya Hansupalak, Kasetsart University, Thailand
Authors: Nanthiya Hansupalak, Kittitat Sodapak, Sundara L. Ghatty, Bobba Rambabu
ICCPE 111
Time: 3:05 - 3:15
Presenter: Sevil Savaskan Yilmaz,Karadeniz Technical University, Turkey
Authors: S. Savaşkan Yılmaz, E. Tütüncü, Y. Mısırlıoglu, A. Küçük, H. Cuvalcı, M. Aslan
ICCPE 118
Time: 3:15 - 3:25
Presenter: Ahmet Hakan Yilmaz, Karadeniz Technical University, Turkey
Authors: A. Hakan Yilmaz, T. Bayram, S. Savaşkan Yilmaz, Y. Misirlioğlu, A. Kucuk
Return to Top ⇑
Session
August 17 | 2:50 - 3:30 | LOBBY | Session Chair: Dr. Jianliang Gao & Dr. Celaletdin Ergun
Poster Session II
ICMIE 113
Authors: Chien-Ching Ma, Ching-Yuan Chang
ICMIE 132
Authors: Kuang-Chong Wu, Tsungyen Tsai
ICMIE 120
Authors: Chang-Yong Song, Woo-Chang Park, Jung-Wook Yang, Seong-Ki Hong, Jonghwan Park, Mun Yong Kim, Jinseo Kang
ICMIE 116
Authors: Chi Hsiang Pan, Chia Hao Lin, Hsin-Ying Pan
ICMIE 115
Authors: C.-K. Hu, F.-B. Liu, C.-F. Hu
MMME 101
Authors: Hyunbock Lee, Huiuk Yi, Youngwook Cheong
MMME 118
Authors: Mitsuhiro Watanabe, Shinji Kumai
MMME 105
Authors: Marc Bascompta, Jordi Vives, Lluís Sanmiquel, José Juan de Felipe
MMME 106
Authors: Lluís Sanmiquel, Marc Bascompta, Jordi Vives, José Juan de Felipe
MMME 122
Authors: David Mutombo, Michel Kalenga, Willie Nheta
MMME 123
Authors: David Mutombo, Willie Nheta, Michel Kalenga
Return to Top ⇑
Session
August 17 | 3:30 - 5:00 | Room 1 | Session Chair: Dr. Jifen Wang
Heat Transfer Enhancement
HTFF 105
Time: 3:30 - 3:50
Presenter: Haifa El Sadi, Wentworth Institute of Technology, USA
Authors: Haifa El-Sadi, Mackenzie Davis, Christopher Barrett, Gerard Rentas, Jaquelyn Reis
HTFF 111
Time: 3:50 - 4:00
Presenter: Chi Zhang, East China University of Science and Technology, China
Authors: Chi Zhang, Li Zhang, Hong Xu, Pei Li, Bo Qian
HTFF 134
Time: 4:00 - 4:20
Presenter: Juan P. Solano, Universidad Politécnica de Cartagena, Spain
Authors: J. P. Solano, F. Roig, F. Illán, R. Herrero-Martín, J. Pérez-García, A. García
HTFF 138
Time: 4:20 - 4:40
Presenter: Daisy Galeana, SDSU/UCSD JDP and Solar Turbines Incorporated, USA
Authors: Daisy Galeana, Asfaw Beyene
HTFF 154
Time: 4:40 - 5:00
Presenter: Keng Yong Chua, Nanyang Technological University, Singapore
Authors: Keng Yong Chua, Kai Xian Cheng, Kim Tiow Ooi
Return to Top ⇑
Session
August 17 | 3:30 - 4:00 | Room 2 | Session Chair: Dr. Emmanuel De Moor
New Materials and Performances
MMME 130
Time: 3:30 - 3:50
Presenter: Naci Emre Altun, Middle East Technical University, Turkey
Authors: N. Emre Altun, Jiann-Yang Hwang, C. Hicyilmaz
MMME 110
Time: 3:50 - 4:00
Presenter: Celaletdin Ergun, Istanbul Technical University, Turkey
Authors: Celaletdin Ergun, Elvan Aydın, Esra Alveroğlu
Return to Top ⇑
Session
August 17 | 3:30 - 4:00 | Room 3 | Session Chair: Dr. Haedo Jeong
Biomechanics
ICMIE 104
Time: 3:30 - 3:40
Presenter: Dong-Jun Park, Pusan National University, Korea
Authors: D. J. Park, J. W. Lee, W. B. Jeong, S. J. Ahn
ICMIE 105
Time: 3:40 - 3:50
Presenter: Dong-Jun Park, Pusan National University, Korea
Authors: S.J. Ahn, D.J. Park, W.B. Jeong
ICMIE 110
Time: 3:50 - 4:00
Presenter: Jun-Woo Lee, Pusan National University, Korea
Authors: Jun-Woo Lee, Se-Jin Ahn, Myung-Jun Shin, Myung-Hun Jang, Weui-Bong Jeong
Return to Top ⇑
Session
August 17 | 5:00 - 6:10 | Room 1 | Session Chair: Dr. Artur Miros
Numerical Fluid Flow, Heat and Mass Transfer II
HTFF 144
Time: 5:00 - 5:10
Presenter: Ivan Cornejo, University of Alberta, Canada
Authors: Ivan Cornejo, Petr Nikrityuk, Robert Hayes
HTFF 172
Time: 5:10 - 5:30
Presenter: Ana Gabriela Chavez Castillo, Université d'Evry Paris Saclay, France
Authors: Ana Gabriela Chavez Castillo, Yassine Rouizi, Olivier Quemener, Laurent Marmoret, Yann Billaud
HTFF 102
Time: 5:30 - 5:50
Presenter: Mohamad Mehyo, Ondokuz Mayis University, Turkey
Authors: Mohamad Mehyo, José J. Costa
HTFF 155
Time: 5:50 - 6:10
Presenter: Prasenjit Dey, Indian Institute of Technology Bombay, India
Authors: Prasenjit Dey, Sandip K. Saha
Return to Top ⇑
Session
August 17 | 4:00 - 5:40 | Room 2 | Session Chairs: Dr. Willie Nheta
Mining Fundamentals and Techniques
MMME 102
Time: 4:00 - 4:20
Presenter: Jianliang Gao, Henan Polytechnic University, China
Authors: Jianliang Gao, Jiangwei Yan
MMME 104
Time: 4:20 - 4:40
Presenter: Xuebo Zhang Henan, Polytechnic University, China
Authors: Xue-bo Zhang, Jian-liang Gao
MMME 117
Time: 4:40 - 5:00
Presenter: Po Li, China National Nuclear Corporation, China
Authors: Li Po, Xu Ying, Liu Guo-hong, Tan Ya-hui, Cheng Wei，Hu Bo-shi
MMME 108
Time: 5:00 - 5:20
Author: Theodore Vlachos, PPC S.A, Greece
MMME 116
Time: 5:20 - 5:40
Presenter: Shu Meng, Beijing Research Institute of Chemical Engineering and Metallurgy, CNNC, China
Authors: Meng Shu, Zhong Pingru, Wu Yongyong
Return to Top ⇑
Session
August 17 | 4:00 - 5:50 | Room 3 | Session Chair: Dr. Manop Charoenchaitrakool & Dr. Nanthiya Hansupalak
Fluid Dynamics, Heat Transfer, and Mass Transfer
ICCPE 112
Time: 4:00 - 4:20
Presenter: Thongchai Rohitatisha Srinophakun, Kasetsart University, Thailand
Authors: Thongchai Rohitatisha Srinophakun, Anoma Kodchakong1
ICCPE 116
Time: 4:20 - 4:30
Presenter: Kandis Sudsakorn, Kasetsart University, Thailand
Authors: Kandis Sudsakorn, Supaphorn Palitsakun
ICCPE 113
Time: 4:30 - 4:40
Presenter: Penjit Srinophakun, Kasetsart University, Thailand
Authors: Penjit Srinophakun, Anusith Thanapimmetha, Maythee Saisriyoot
ICCPE 121
Time: 4:40 - 5:00
Presenter: Hamed Ahari, Islamic Azad University, Iran
Authors: Hamed Ahari, Solmaz Barani, Saeed Bazgir
ICCPE 125
Time: 5:00 - 5:20
Presenter: Hamed Ahari, Islamic Azad University, Iran
Authors: Hamed Ahari, Guity Karim, Amir Ali Anvar, Mobina Pooyamanesh, Atefeh Mostaghim, Sogand Heydari
ICCPE 104
Time: 5:20 - 5:40
Presenter: Qiaofang Shi, Yangzhou University, China
Authors: Qiaofang Shi, Ming Chen, Guowang Diao
ICCPE 105
Time: 5:40 - 5:50
Author: Jinqing Kan, Yangzhou University, China
Return to Top ⇑
|
|
|||
|
Parallel Sessions |
|||
|
Room 1 |
Room 2 |
||
| 9:00 - 9:45 |
Keynote Lecture
Jet Impingement Boiling Heat Transfer-A Complex and Effective Phenomenon
|
9:00 - 9:45 |
Keynote Lecture
A Systematic Approach to Develop a Family of Theories for Structural Elements
|
| 9:45 - 10:30 |
Keynote Lecture
Investigation of Thermal Stability of Non-Newtonian Melt Flows
|
9:45 - 10:30 |
Keynote Lecture
Destress Blasting – From Theory to Practice
|
| 10:30 - 10:50 | Coffee Break |
||
| 10:50 - 12:10 |
Session
Multiphase Flow and Heat Transfer I |
10:50 - 12:10 |
Session
Industrial Engineering II |
| 12:10 - 1:10 |
Lunch - Buffet lunch will be served in the hotel restaurant |
||
| 1:10 - 2:20 |
Session
Multiphase Flow and Heat Transfer II |
1:10 -1:50 |
Session
Industrial Engineering III |
| 1:50 - 2:30 |
Session
Modeling of Processes |
||
| 2:20 - 3:10 |
Session
Experimental Fluid Flow and Heat Transfer |
2:30 - 3:10 |
Session
Mineral Processing |
| 3:10 - 3:30 | Coffee Break |
||
| 3:30 - 4:40 |
Session
Combustion |
3:30 - 4:10 |
Session
Metallurgical Fundamentals and Techniques |
8:00 PM - 10:00 PM |
CLOSING CEREMONY
Gala Dinner
|
Keynote Lecture
August 18 | 9:00 - 9:45 | Room 1 | Session Chair: Dr. Jalel Azaiez, The University of Calgary, Canada
Jet Impingement Boiling Heat Transfer-A Complex and Effective Phenomenon
Dr. Mohamed Hamed, McMaster University, Canada
Mohamed Hamed is a Professor of Mechanical Engineering and the Founding Director of the Thermal Processing Laboratory (TPL) at The Department of Mechanical Engineering, McMaster University, Canada. His research interests are in modelling fluid flow, heat transfer, and materials processes of various thermofluid systems. His research involves laboratory scale experiments and numerical modelling techniques. His research contributions have been disseminated in more than 100 scientific publications. Dr. Hamed has taught several undergraduate and graduate courses: Fluid Mechanics, Computational Fluid Dynamics, Modeling of Thermal Processes, Advanced Fluid Mechanics. He has developed a number of technical courses for practicing engineers in the areas of Optimization of Energy Efficiencies in Industrial Processes, Advanced Energy Management, Renewable Energy Systems, and Heating, Ventilation and Air Conditioning Sustems. Dr. Hamed is a Registered Professional Engineer in the Province of Ontario, Canada and a Member of different professional societies such as: CSME, ASME, ASM Heat Treating Society, SME, ASHRAE, and CFD Society of Canada. He is the Editor-In-Chief of the Universal Journal of Mechanical Engineering and an Associate Editor and Editorial Board Member of various National and International journals: Transactions of the Canadian Society of Mechanical Engineers (CSME), The International Journal of Microstructure and Materials Properties (IJMMP), The International Journal of Computational Thermal Sciences, Journal of Materials Performance and Characterization, and The International Journal of Electronics Cooling and Thermal Control. He is also a technical reviewer in more than thirty technical international journals and funding agencies.
View Abstract Return to Top ⇑
Keynote Lecture
August 18 | 9:00 - 9:45| Room 2 | Session Chair: Dr. Hani Mitri, McGill University, Canada
A Systematic Approach to Develop a Family of Theories for Structural Elements
Dr. Peter Folkow, Chalmers University of Technology, Sweden
Peter D. Folkow is Associate Professor at Department of Mechanics and Maritime Sciences at Chalmers University of Technology in Gothenburg. He received his PhD degree in Mechanics studying inverse wave propagation problems in beams and plates. His research interest has developed towards studying various direct wave propagation and structural dynamics problems; both of applied nature, e.g. energy harvesting, and of more basic oriented nature. Among the latter, he has for 20 years participated in the development of more accurate theories for structural elements (beams, plates, shells) applicable to all sorts of materials such as sandwich, anisotropic, poroelastic, functionally graded, piezoelectric and micromechanic materials.
Dr Folkow is since 2015 head of the Division of Dynamics at Chalmers. The division’s research covers several fields within solid dynamics such as modal analyses, multibody dynamics, wave propagation and fatigue phenomena. In addition the division is host for the National Centre of Excellence in Railway Mechanics (CHARMEC).
View Abstract Return to Top ⇑
Keynote Lecture
August 18 | 9:45 - 10:30 | Room 1 | Session Chair: Dr. Jalel Azaiez, The University of Calgary, Canada
Investigation of Thermal Stability of Non-Newtonian Melt Flows
Dr. Chamil Abeykoon, The University of Manchester, UK
Chamil received his BSc (Hons) in Mechanical Engineering from the University of Peradeniya, Sri Lanka with the award of best performance in Mechanical Engineering in 2007. Then, he received his PhD in Mechanical Engineering in 2011 from the Queens University Belfast, UK with several publications where one of his publications was awarded with a young author best paper award from the IEEE in 2011. After having a few academic positions, Chamil joined the Faculty of Science and Engineering of University of Manchester (UoM) as an Assistant Professor in October 2015. Currently Chamil is working mainly with the Northwest Composts Centre and the Aerospace Research Institute of the UoM. So far, he has authored 35+ peer-reviewed journal/conference papers. Moreover, he is the author of the monograph Polymer Extrusion: A Study on Thermal Monitoring Techniques and Melting Issues. His research interests include: Process Monitoring, Modelling and Control; Soft Sensors and Soft Sensing; Process Instrumentation; Energy Efficiency; and Heat Transfer. At present, he is mainly researching in the areas such as melt flow behaviour in polymer processing, 3D printing, development of inferential (soft) sensors for processing applications, heat transfer (heat flow and cooling) in gas turbine applications. He is an associate member of the IESL, IMechE, ICPM and also a Fellow of the Higher Education Academy UK.
View Abstract Return to Top ⇑
Keynote Lecture
August 18 | 9:45 - 10:30 | Room 2
Destress Blasting – From Theory to Practice
Dr. Hani Mitri, McGill University, Canada
Dr. Hani Mitri is Professor and Director of Mining Engineering at McGill University, and founder of McGill Mine Design & Numerical Modelling Laboratory in 1988. In his career, he has made technical and scientific contributions as an educator, researcher, and consultant in the mining engineering discipline in the areas of rock engineering, ground control safety, mine design, and ore transportation. He has more than 30 years of teaching and research experience, and published more than 220 papers in scientific journals and conference proceedings. He supervised to completion more than 50 Master's and PhD students. He is the recipient of CIM Fellowship from the Canadian Institute of Mining in recognition of his outstanding contributions to the mining community in Canada. He is also the recipient of the J.A. Franklin Award by the Canadian Geotechnical Society for his contributions in rock mechanics. He is Co-Editor of International Journal of Mining Science and Technology, and editorial board member of several other journals.
View Abstract Return to Top ⇑
Session
August 18 | 10:50 - 12:10 | Room 1 | Session Chair: Dr. Chamil Abeykoon, The University of Manchester, UK
Multiphase Flow and Heat Transfer I
HTFF 106
Time: 10:50 - 11:10
Presenter: Mohamad Mehyo, Ondokuz Mayis University, Turkey
Authors: Mohamad Mehyo, Hakan Ozcan, Ahmed Hassan Ahmed Hassan
HTFF 116
Time: 11:10 - 11:30
Presenter: Kai Wu, Southeast University, China
Authors: Kai Wu, Bin Li, Zhulin Yuan
HTFF 130
Time: 11:30 - 11:50
Presenter: Huihe Qiu, The Hong Kong University of Science and Technology, Hong Kong
Authors: Hongzhao Wang, Minghao He, Huihe Qiu
HTFF 159
Time: 11:50 - 12:10
Presenter: Roberto Cruces, Universidad Nacional Autonoma de Mexico, Mexico
Authors: Roberto Cruces, Bernardo Hernández, Francisco Novas
Return to Top ⇑
Session
August 18 | 10:50 - 12:10 | Room 2 | Session Chair: Dr. Peter Folkow
Industrial Engineering II
ICMIE 114
Time: 10:50 - 11:10
Presenter: Raneem Gashgari, King Abdulaziz University, Saudi Arabia
Authors: Lamees Alhashimi, Lujain Aljawi, Raneem Gashgari, Abrar Alamoudi
ICMIE 103
Time: 11:10 - 11:30
Presenter: Youngbok Kim, Pukyong National University, Korea
Authors: T. W. Kim, D. H. Lee, V. Trong, C. H. Son, J. I. Yoon, K. H. Choi, Y. B. Kim
ICMIE 137
Time: 11:30 - 11:50
Author: Pavee Siriruk, Suranaree University of Technology, Thailand
ICMIE 131
Time: 11:50 - 12:10
Presenter: Raneem Gashgari, King Abdulaziz University, Saudi Arabia
Authors: Raneem Gashgari, Khawlah Alharbi, Khadija Mughrbil, Ajwan Jan, Abeer Glolam
Return to Top ⇑
Session
August 18 | 1:10 - 2:20 | Room 1 | Session Chair: Dr. Huihe Qiu
Multiphase Flow and Heat Transfer II
HTFF 162
Time: 1:10 - 1:30
Author: Bella Gurevich, Shamoon College of Engineering, Israel
HTFF 167
Time: 1:30 - 1:50
Presenter: Gaurav A. Kulkarni, Otto von Guericke University Magdeburg, Germany
Authors: Gaurav A. Kulkarni, E. Specht
HTFF 168
Time: 1:50 - 2:00
Presenter: William Hay, Université catholique de Louvain-la-Neuve, Belgium
Authors: William Hay, Miltiadis Papalexandris
HTFF 174
Time: 2:00 - 2:20
Presenter: Edgar Cando, Tsinghua University, China
Authors: Edgar Cando, RenFang Huang, Esteban Valencia, XianWu Luo
Return to Top ⇑
Session
August 18 | 1:10 -1:50 | Room 2 | Session Chair: Dr. Pavee Siriruk
Industrial Engineering III
ICMIE 130
Time: 1:10 - 1:30
Presenter: Wai Chung Yeong, Universiti Malaya, Malaysia
Authors: Wai Chung Yeong, Sok Li Lim, Zhi Lin Chong, Peh Sang Ng
ICMIE 129
Time: 1:30 - 1:50
Presenter: Sok Li Lim
Authors: Sok Li Lim, Wai Chung Yeong, Boon Chong Khoo, Xin Ying Chew
Return to Top ⇑
Session
August 18 | 1:50 - 2:30 | Room 2 | Session Chair: Dr. Sok Li Lim
Modeling of Processes
ICMIE 135
Time: 1:50 - 2:10
Author: Albert Materdey, Quantum FC, Inc., USA
ICMIE 108
Time: 2:10 - 2:30
Author: Taekyu Jung, Korea Aerospace Research Institute, Korea
Return to Top ⇑
Session
August 18 | 2:20 - 3:10 | Room 1 | Session Chair: Dr. Bella Gurevich
Experimental Fluid Flow and Heat Transfer
HTFF 114
Time: 2:20 - 2:30
Presenter: DongChan Lee, Korea University, Korea
Authors: DongChan Lee, Dongwoo Kim, Junyub Lim, Wonseok Yang, Yongchan Kim
HTFF 152
Time: 2:30 - 2:50
Presenter: Ashish Kumar, Indian Institute of Technology Bombay, India
Authors: Ashish Kumar, Pardeep Shahi, Sandip K Saha
HTFF 170
Time: 2:50 - 3:10
Presenter: Rajat Saxena, Indian Institute of Technology Delhi, India
Authors: Rajat Saxena, Dibakar Rakshit, S. C. Kaushik
Return to Top ⇑
Session
August 18 | 2:30 - 3:10 | Room 2 | Session Chair: Dr. Xuebo Zhang
Mineral Processing
MMME 114
Time: 2:30 - 2:50
Presenter: Samah Saleh, Cenral Metallurgical Research and Development Institute, Egypt
Authors: Samah S.Abdallah, E. H. El-shatoury, Nagui A. Abdel-khalek, Mohamed A. Youssef, M. K. Ibrahim, Khaled A. Selim
MMME 124
Time: 2:50 - 3:10
Presenter: Willie Nheta, University of Johannesburg, South Africa
Authors: Mohale Letseli, Willie Nheta, Arno Steinmuller
Return to Top ⇑
Session
August 18 | 3:30 - 4:40 | Room 1 | Session Chair: Dr. Edgar Cando
Combustion
HTFF 143
Time: 3:30 - 3:50
Author: Kweonha Park, Korea Maritime and Ocean University, Korea
HTFF 101
Time: 3:50 - 4:10
Authors: Athrva Pandhare, Abhishek Puri
HTFF 121
Time: 4:10 - 4:20
Author: Chan-Sol Ahn, Korea Institute of Civil Engineering and Building Technology, Korea
HTFF 147
Time: 4:20 - 4:40
Presenter: Bijan Yadollahi, University of Glasgow, United Kingdom
Authors: Bijan Yadollahi, Matthew Ritchie, Nader Karimi, Manosh C. Paul
Return to Top ⇑
Session
August 18 | 3:30 - 4:10 | Room 2 | Session Chair: Dr. Youngbok Kim
Metallurgical Fundamentals and Techniques
MMME 119
Time: 3:30 - 3:40
Presenter: Mateus Moraes, CDTN - Centro de Desenvolvimento da Tecnologia Nuclear, Brazil
Authors: Mateus L. B. Moraes, Ana Claudia Q. Ladeira, Elaine C. Felipe, Thales A. Carneiro, Augusto A. Camargos, Gabriel Silva, Bruna Vidigal, Kelvin A. Batista
MMME 120
Time: 3:40 - 3:50
Presenter: Yousuf Al-Ghadeer, SABIC, Saudi Arabia
Authors: Yousuf Al-Ghadeer, Ali Al-Shawaf, Abduljabbar Khan, Syed Jainulaudeen Nisthar
MMME 126
Time: 3:50 - 4:10
Presenter: Mustafa Safa Yilmaz Fatih Sultan Mehmet Vakif University, Turkey
Authors: Mustafa Safa Yilmaz, Orhan Sahin
Return to Top ⇑